In this article let us learn How to Bridge Two Car Audio Amps in six easy steps and the advantages of bridging two car amplifiers with tips and warning for doing this job perfectly. Let us learn to get it right the first time itself because wrong connection may blow out the speakers or even burn the amps or sometimes in the worst case both may happen.
There are few tools required for doing this process. It includes pliers, 2 car audio amps, wire strippers, wrench, wire rated for the amplifiers. These tools will help in the accomplishment of task in a simpler way and easier way too.
The first step is to carefully study the instruction manual to ensure which two amplifiers can be connected together. Power compatibility will determine if the bridge would be safe or not. Sometimes we may have a doubt if these two amps can be bridged. In that case don’t make an attempt to do that as it may burn the amps. Safe bridging is very important or else the loss incurred from improper connection may become very expensive.
Before attempting to perform the operation please make sure to power down both the amplifiers. It is as simple as it is just disconnection of them from the power supply. There is one easy way to do this. It is just disconnecting from the car battery the positive cable clamp either with wrenches or pliers so as to keep it inactive throughout the process of bridging.
The amplifiers are always provided with a switch the back side. Check fir the switch and turn it to the bridge mode. This will make it possible to bridge two amps.
The most important thing to be done is the connection of the wires. The positive terminal of one amplifier holds one end of the wire while the other end is held by the negative terminal of the other amplifier. This can be performed by wrapping them around its corresponding terminal and then screwing them down. There is a clear distinction between the positive and negative terminals which is given by its color difference where red indicates positive and black indicates negative terminal.
The last step is to make the connections complete. Now we have to connect the amplifiers to the speakers. Only one terminal either positive or negative is used for connection with the wire. The other terminals of amplifiers which are free should be connected with the terminals on the speaker. Always ensure that we connect positive terminals of speakers and amplifiers together and negative terminals of speakers and amplifiers together. The speaker system now has improved sound after bridging of amplifiers . Browse through web sites like ehow com for further free tips.
This article would have proved to be effective in guiding us on How to Bridge Two Car Audio Amps by instructing and explaining all steps with useful suggestions and tips.
Want to find out more about Car Hifi, then visit Author Name’s site on how to choose the best Car Audio for your needs.
